Aluminum Sheet Coil For Aluminum Finstock
Thickness 0.20mm-0.38mmThickness 0.2mm-0.38mm AA1100/ 8011/ AA3120 Aluminum Sheet Coil For Aluminum Finstock
1. Application: present foil stock is suitable for rerolling into foils used for coating and sliting, final application is fins in air conditions.
2. Alloy, Temper, Gauge And Width:
| ALLOY | TEMPER | SIZE(MM) | |
| GAUGE | WIDTH | |
| 1100,1200,8011,3102 8006 | H18,H16 | 0.2—0.38MM | ≤1900 |
| OTHER REQUIREMENTS OTHERWISE SHALL BE AGREED BETWEEN SELLER AND BUYER |
- INNER DIAMETER: 400/500MM.
- SIZE TOLERANCE.
3. Thickness and Thickness tolerance:
| THICKNESS(MM) | THICKNESS TOLERANCE |
| > 0.20-0.38 | ±0.010 |
4. Width and Width tolerance:
| WIDTH(MM) | WIDTH TOLERANCE |
| ≤500 | +1.0,-0.5 |
| > 500 | ±1.0 |
5. Reel:
| WIDTH(MM) | WIDTH TOLERANCE |
| ≤1900 | +2.0,0 |
6. TELESCOPICY ANDLAYER.
TELESCOPICY: 5MM
LAYER: 0.5MM
| ALLOY | TEMPER | GAUGE(MM) | TENSILE STRENGTH(MPA) | ELOGATION AT 50MM INTERVAL(%) | CUP I.E,MM |
| 8011 3102 |
| H18/H16 | 0.2-0.38 | ≥160 | ≥10 | ≥6.5 |
7. SURFACE QUALITY.
SURFACE SHALL BE CLAEN, FLAT, MILL FINISH, WITHOUT SCRAPES, HOLES, CORRPSION, OILSTAINS,
ETC DEFECTS WHICH EFFECTS APPLICATION JOINTS FOE EACH COILS SHALL NOT BE MORE THAN 1 AND APPERANT MARKING SHALL BE INDICATED ON JOINTS.
8. PACKING: WOODEN PALLETS
Our advantages:
1, Since 2008, we have rich experience in this industry in China;
2, Good reputation in the production of aluminium/aluminum plate areas;
3, We start our productions from aluminum ingot,so we can control the quality as well;
4, We have our own development department for new material research;
5, Good experience and cooperation with big clients in the world;
6, With Certificate ISO9001-2008;
7, High performance cost ratio;
8, Fast delivery time;
9, Customized orders available;
10, Good communication skills, and good service and understandings for customers.
Product Tags:
|
|
H18 H16 TEMPER Mill Finish Aluminum Coil GAUGE 0.2—0.38MM For Coating Sliting Images
|
